Quick Installation Guide Model # AWLC3025 Section 1 Install Utility Software Step 1 Before installing the utility software, do not insert the cardbus adapter into your computer. If the cardbus is inserted already, Windows will detect the adapter and request for a driver. Click Cancel to quit the wizard and remove the cardbus adapter from your computer.
Page 2
Step 5 Click Next at the Select Program Folder screen. Step 6 Remove the Driver & Utility CD from your CD drive and then click OK to restart your computer. Section 2 Install Cardbus and Driver Note: In most cases, Windows will automatically install the driver after the computer is restarted.
Page 3
Section 3 Step 3 For Windows XP, click Continue Anyway at the Windows Logo Compatibility screen. For Windows 2000, click Yes at the Digital Signature screen. For Windows 98SE or ME, insert the Windows 98SE or ME CD if prompted to do so and click OK.
Section 4 Troubleshooting If the utility cannot be opened or it reports that the cardbus is not found, uninstall the driver and utility and try installing again. You can also verify if the driver is installed properly in the Device Manager. For instructions on how to access the Device Manager, please refer to the User’...