Leica WILD M695 Service Manual page 15

Service Manual M680
Doc code 556 948
Swingarm
Description of function
M680 microscope
Description of function
Wiring diagram
Exchanging modules
Exchanging boards
Testing procedure
Test set
Spare parts
The function description in Section 6, in conjunction with the wiring diagram,
will lead you to the defective board or cable connection. The swingarm is the
interface.
The function description in Section 7, in conjunction with the wiring diagram,
will lead you to the defective board or cable connection. The swingarm is the
interface.
Section 9 contains the wiring diagram, and a description of the positions of
the boards and the plug connections.
Section 10 includes instructions for exchanging those modules which are
available as spare parts.
Section 11 includes instructions for exchanging those boards which are
available as spare parts.
After modules or boards have been replaced, the instrument must meet
specifications. Values and tolerances are laid down in the testing procedure
in Section 12.
The test box and service cable, and their circuits, are described in Section 18.
The spare parts, the exchange of which is described in Sections 8 and 9, are
listed in Section 19.
Introduction
03/93 3077-HWE