Leica WILD M695 Service Manual page 13

Service Manual M680
Doc code 556 848
Intended users
What is expected of
the person using the
Testset?
Preconditions
for using this service manual
Technical personnel provided by customer or by LEICA agencies, equipped
with the testset 566 152 (see Section 18).
Stage 1: Allocation of a fault to one of the main groups:
- Footswitch
- Control unit
- Swingarm
- Microscope (optics carrier)
• You have read the user manual and can operate the surgical microscope
Directions are given in Sections 3 and 4.
Stage 2: Locating and eliminating errors at module level
• You have been trained in the basics of electronics and mechanical
engineering
• You have been instructed by a technician from your agency or from
LEICA AG, HEERBRUGG.
Sections 3,4 and 10
Stage 3: Locating and eliminating errors at board level
• You have been trained in the basics of electronics and mechanical
engineering
• You have taken part in an M690/M695- or M680 course.
Sections 3 to 9, and Section 11
Introduction
03/93 3077-HWE
3-1