Configuring Rsync Server Settings - Iomega StorCenter ix12 User Manual

45
rsync Server Settings
When you turn on this protocol, you can enable the Iomega StorCenter ix12 as an rsync server. When the Iomega StorCenter ix12 is an rsync server, it can be
used as a source and/or destination device for rsync Copy Jobs. Because of the fast and efficient nature of rsync, an rsync Copy Job can be faster than a
Windows File Sharing Copy Job. For more information on Copy Jobs, refer to
If you enable the Iomega StorCenter ix12 as an rsync server, you can optionally set up a user account on the Iomega StorCenter ix12 for secure rsync Copy
Jobs.

Configuring rsync server settings

1. To enable rsync server, click the switch on.
2. Once turned on, supply a port that the rsync Server uses.
3. To create a secure user account, check Configure secure rsync credentials. The username is preset as rsync. Enter a password and confirm it for the
rsync username. When you create a secure rsync user account on the Iomega StorCenter ix12, you allow other devices to securely copy to or from it.
4. Click Apply to save your settings.
To change any rsync server settings, click
Copy Jobs.
.
Iomega StorCenter ix12