Manual Update Process: Installing A Device Software Update - Iomega StorCenter ix12 User Manual

82
Software Updates
The Software Updates page identifies the Iomega StorCenter ix12 software status and provides the ability to update the software for the Iomega StorCenter
ix12.
This software is protected by RSA BSAFE technology.

Manual update process: installing a device software update

1. In the table listing the current software installed on your Iomega StorCenter ix12, click
2. If an update is available, the Status column will state that a software update is available with a link. Download the update file to your local computer.
3. To retrieve the update, click
4. In the Add Software pop-up window, if an update is available, there will be a link to download the appropriate update for your Iomega StorCenter ix12.
Click the link, follow the instructions on the download site page, and download the software update to your local computer.
5. Once downloaded, click Browse to select the update, and then click Upload to continue.
When the update is uploaded to the Iomega StorCenter ix12, the Status column will say Ready to apply.
6. Click Apply all pending updates to apply the update or updates. The software updates will be applied to your Iomega StorCenter ix12. If you want
to remove the update without applying changes, click
The Iomega StorCenter ix12 restarts once the software is installed. You should not power down the Iomega StorCenter ix12 during the installation
process as this can damage the Iomega StorCenter ix12. If multiple updates are ready, all of them will be applied, requiring only one reboot.
The Iomega StorCenter ix12 will be temporarily inaccessible during the software update. Be sure no critical files are being accessed.
Add Software.
in the Action column.
Iomega StorCenter ix12
in the Action column to check for updates.