Configuring Bluetooth Settings - Iomega 34337 - Home Media Network Hard Drive NAS Server User Manual

32
Bluetooth
Once a Bluetooth adapter is detected, files can be uploaded to a configurable destination Share on the Home Media Network Hard Drive from a Bluetooth
device.

Configuring Bluetooth settings

1. To enable Bluetooth, click the switch on.
2. Once Bluetooth Transfer is enabled, check the Enable security checkbox to require Bluetooth users to supply a unique PIN that they have defined
before allowing them to transfer files to the destination Share on the Home Media Network Hard Drive. If you have enabled security, you must define a
unique PIN number, which will be supplied by devices attempting to upload data using Bluetooth.
3. To set the destination Share, click
4. Click Apply to save your settings.
To change any Bluetooth settings, click
.
.
Iomega® Home Media Network Hard Drive Cloud Edition