Rsync Server Settings; Configuring Rsync Server Settings - Iomega Ix2-200 - StorCenter Network Storage NAS Server User Manual

41

rsync Server Settings

When you turn on this protocol, you can enable the Iomega StorCenter ix2-200 as an rsync server. When the Iomega StorCenter ix2-200 is an rsync server, it
can be used as a source and/or destination device for rsync Copy Jobs. Because of the fast and efficient nature of rsync, an rsync Copy Job can be faster than
a Windows File Sharing Copy Job. For more information on Copy Jobs, refer to
If you enable the Iomega StorCenter ix2-200 as an rsync server, you can optionally set up a user account on the Iomega StorCenter ix2-200 for secure rsync
Copy Jobs.

Configuring rsync server settings

1. To enable rsync server, click the switch on.
2. Once turned on, supply a port that the rsync Server uses.
3. To create a secure user account, check Configure secure rsync credentials. The username is preset as rsync. Enter a password and confirm it for the
rsync username. When you create a secure rsync user account on the Iomega StorCenter ix2-200, you allow other devices to securely copy to or from it.
4. Click Apply to save your settings.
To change any rsync server settings, click
Copy Jobs.
.
Iomega StorCenter ix2-200