Using Tx Lock (Key Lock For Some Countries); Setting Up The Tx Lock For The First Time - Brother FAX-1820C User Manual

Using TX Lock (KEY Lock for some countries)

You must use a password to switch TX Lock ON and OFF.

Setting Up the TX Lock for the First Time

1
Menu/Set
Press
2
Enter a 4-digit number as a new
password.
3
Menu/Set
Press
The screen prompts you to re-enter
the password.
4
Re-enter the password and press
5
Press
6
Menu/Set
Press
prompts you to enter the password.
7
Enter a 4-digit password, followed by
This is the same as the security password of the machine
already stored.
The screen displays Accepted for 2 seconds, followed by
TX Lock Mode - TX Lock is now switched ON.
If the password you enter at Step 7 is incorrect, the screen
would display Wrong Password . After 2 seconds the display
will then return to normal (displaying the date & time). You must
then switch ON TX Lock again. (See Switching TX Lock ON on
page 6-20.)
6 - 19 SETUP SEND
2 0 1
, , , .
.
or to choose Set TX Lock .
. The screen
1.TX Lock
New Passwd:XXXX
Verify:XXXX
Menu/Set
.
Password:XXXX
Menu/Set
.