Healthrider H82e Elliptical User Manual page 21

HOW TO USE AN IFit WORKOUT
You must have an iFit module to use an iFit workout.
To purchase an iFit module at any time, go to www.
iFit.com or call the telephone number on the front
cover of this manual.
Note: To use an iFit module, you must have access
to a computer with an internet connection and a USB
port. You will also need an iFit.com membership. To
use a wireless iFit module, you must also have your
own wireless network including an 802.11b router with
SSID broadcast enabled (hidden networks are not
supported).
IMPORTANT: To satisfy exposure compliance
requirements, the antenna and transmitter in the
iFit module must be at least 8 in. (20 cm) from all
persons and must not be near or connected to any
other antenna or transmitter.
1. Begin pedaling or press any button on the
console to turn on the console.
See HOW TO TURN ON THE POWER on
page 18.
2. Make sure that the iFit module is inserted in the
console.
To use an iFit workout, make sure that the iFit mod-
ule is inserted in the console.
3. Select the iFit mode.
To select the iFit mode, press the iFit button.
4. Select a user.
If more than one user is registered, you can switch
users in the iFit main screen. Press the increase
and decrease buttons next to the Enter button to
select a user.
5. Select an iFit workout.
To select an iFit workout, press one of the iFit but-
tons. Before a workout will download, you must add
the workout to your queue on
www.iFit.com.
Press the iFit button to download the next workout
in your queue. Press the My Trainer button, the My
Maps button, the World Tour button, or the Event
Training button to download the next workout of
that type in your queue. Press the Compete but-
ton to compete in a race that you have previously
scheduled. For more information about the iFit
workouts, please see
www.iFit.com.
When you select an iFit workout, the display will
show the duration of the workout and the approxi-
mate number of calories you will burn. The display
may also show the name of the workout. If you
select a competition workout, the display may
count down to the beginning of the race.
6. Start the workout.
See step 3 on page 20.
During some workouts, the voice of a personal
trainer will guide you through your workout. You
can select an audio setting for your personal trainer
(see HOW TO CHANGE CONSOLE SETTINGS on
page 22).
To stop the workout at any time, stop pedaling. The
time will flash in the display. To resume the work-
out, simply resume pedaling.
7. Follow your progress with the display.
See step 4 on page 18.
The My Trail tab will show a map of the trail you are
walking or running or it will show a track and the
number of laps you are completing.
During a competition workout, the Competition tab
will show your progress in the race. As you race,
the top line in the matrix will show how much of the
race you have completed. The other lines will show
other competitors. The end of the matrix represents
the end of the race.
8. Measure your heart rate if desired.
See step 5 on page 19.
9. When you are finished exercising, unplug the
power cord.
See step 6 on page 19.
For more information about the iFit mode, go to
www.iFit.com.
21