Parts:
• Side Tubes (#9)
• Bottom Bracket (#10)
Hardware
• 2 3/4" Bolts (#13)
• Washers (#15)
• Nuts (#14)
Tools:
• Allen wrench (7/32")
• Wrench/Socket (9/16") or Open End Wrench
Attach the Bottom Bracket (#10) to the Side
1-1
Tubes (#9) using the hardware shown in Figure 1.
Note: Do not tighten hardware at this time.
Parts:
• Base assembly from Step 2
• Base Support (#1)
Hardware
• 2 3/4" Bolts (#13)
• Washers (#15)
• Nuts (#14)
Tools:
• Allen wrench (7/32")
• Wrench/Socket (9/16") or Open End Wrench
Carefully tilt the base assembly forward to rest
2-1
on the four Side Tube ends. Attach the Base
Support (#1) to the Bottom Bracket (#12) using
the hardware as shown in Figure 2. Make sure
that the Base Support feet are pointing away
from the base assembly.
Note: Do not tighten hardware at this time.
Turn the base assembly upright to rest on all
2-2
four feet.
Qty
4
8
4
Qty
2
4
2
�
��
��
��
��
Figure 1
��
�
��
��
Figure 2
��
�
��
��
step
1
step
2
5