Radio Shack 15-2526 User Manual page 3

To Stereo Video
Use a stereo A/V cable to connect your modulator to a stereo
video source. Connect one end of the cable to the modulator's
VIDEO (yellow) and L/R AUDIO (white/red) jacks. Connect the
cable's other end to your video source's video and audio output
jacks.
To Mono Video
Use an A/V cable to connect your modulator to a mono video
source. Connect one end of the cable to the modulator's
VIDEO (yellow) and AUDIO (white) jacks. Connect the cable's
other ends to your video source's video and audio jacks.
To S-video
If your video source has an S-Video jack, use an S-Video cable
to connect the modulator's S-VIDEO jack to your video source's
S-Video jack. If your video source is connected to both the
modulator's VIDEO and S-VIDEO jacks, the modulator uses
S-video.
Channel 3/4
Switch
Rear View
S-Video Cable or A/V Cable
3