Package Contents - Radio Shack 15-2526 User Manual

Package contents

• RF Modulator
• User's Guide
Features
• Equips your TV with A/V inputs
• Converts any A/V signal into coaxial cable output
1
Connect the Modulator
You need the following parts (not supplied) to connect
your modulator to a video input source and your TV:
• One A/V shielded cable. If your video source's
audio output is stereo, use an A/V cable with
three phono connectors at each end. If your video
source's audio output is mono, use an A/V cable
with two phono connectors at each end.
• Two 75-ohm coaxial cables with F-type connectors.
• One 75-ohm-to-300-ohm matching transformer
(only if your TV does not have a VHF 75-ohm
terminal).
• One S-Video cable (only if your video source has an
S-Video jack).
2