The Clock Setup Menu; Label Menu - Fluke 983 User Manual

Fluke 983
Users Manual

The Clock Setup Menu

To use the Clock Setup Menu:
1. From the Main Screen, press
Clock Setup Menu, the user can change the Particle
Counter's date, time, and delay, see Figure 7.
2. Use and to move the cursor up and down on
1
this screen. Press
mode. Once in this mode,
increase or decrease the selected entry.
2
3. Use (left arrow) and
the entry selected.
4. Once the correct data has been entered, press
(ENTER) to store the data.
F2
F1
Figure 7. Clock Setup Menu
10
3
(CLOCK). From the
(PROGRAM) to enter the edit
and are used to
3
(right arrow) to change
1
F4
F3
bak04f.eps
To change the format of the date from dd/mm/yyyy to
mm/dd/yyyy:
Move the cursor down to Date.
1.
1
2. Select (PROGRAM).
4
3. Select (FORMAT). The date will switch to the next
version.
1
4. Press (ENTER) to store the choice.
To use a 24-hour clock or a 12-hour clock:
Move the cursor down to Time.
1.
1
2. Select (PROGRAM)
4
3. Select (FORMAT). The clock will switch to a 24 or
12-hour version.
1
4. Press (ENTER) to store the choice.
4
5. Press (RETURN) to return to the Main Screen.

Label Menu

It may be useful to assign labels to samples taken from
different areas or rooms. Use the Label Menu to select
sample labels, see Figure 8.
To use the Label Menu:
1. From the Main Screen, press
2. Once at the Label Menu, use
desired location number.
3. Once the location number is selected, press
1 (EDIT).
4
(LABEL).
and to select the