Fluke 750SW User Manual page 33

4.2.2.7.2 Field Mapping
The "Field Mapping" section allows you to set the "Status". The dropdown will contain a
list of existing Statuses in the system.
The screen allows you to map the Location, Responsible & Area fields of DPC/Track to
new or different fields in DPCTrack2. The "Frequency Mapping" section allows you to
attempt to map your frequencies from DPC/Track format to DPCTrack2 format.
4.2.2.7.3 Validate Files
The "Validate Files" button will check that the files have the right extension.
4.2.2.7.4 Initiate Import
After you have mapped all areas and validated the file extensions, you can then select the
"Initiate Import" button. You will receive a confirm message first. The "Field Mapping"
section will be replaced with a "Results" section. See figure 4.5 below.
Shop for Fluke products online at:
Figure 4.5
MyFlukeStore
www.
Home Screen
4.2 Menu Toolbar
1.877.766.5412
.com
4
4-7