Fluke 750SW User Manual page 168

DPCTrack2
Users Manual
Example: An Import is performed that creates 40 Instruments each with 3
calibration results. Your log file indicates that 3 calibration results for the
same Instrument ID were not imported because the "ID Does Not Exist in
the Database". If you manually create the Instrument ID and run the
import again, there will be no change to the previously imported Instrument
records but 3 additional calibration results will be created for the original
Instruments.
If the Instrument record already exists in DPCTrack2, the import will NOT
update the record.
The following records will not be migrated into DPCTrack2 from
DPCTrack files
20-6
Shop for Fluke products online at:
Instrument Records with no Tag ID
Instrument Records with a Tag ID longer than 32 characters
Instrument Records with duplicate Tag IDs (first one will be
migrated, subsequent ones will be kicked out)
History Records with a blank Tag ID
History Records that do not have a corresponding Instrument
record in the database
History Records that are not one of the following types:
o 74x Binary
o Manual Binary
o Manual Analog
o 702 Analog
o 74x Analog
o 74x Logged Data
MyFlukeStore
www.
Note
Note
.com
1.877.766.5412