Maintenance; In Case Of Difficulty; Cleaning; Calibration - Fluke 707Ex User Manual

Maintenance

W
To avoid electric shock, personal injury, or
damage to the Calibrator:
Do not service this product. To maintain the
integrity of the Calibrator in explosive
atmospheres return the Calibrator to Fluke
for all repairs.
Remove any input signals from the test
probes prior to removing test leads from the
Calibrator.
When servicing the Calibrator, use only
specified replacement parts described in the
Replaceable Parts section.
Use only the battery specified in the
Approved Batteries table.
Do not allow water to get in the case.
Contact a Fluke Service Center before performing any
maintenance procedure not described in this Users
Manual.
Warning

In Case of Difficulty

Make sure you are using the Calibrator as described in
this Users Manual and the Fluke 707Ex CCD (Concept
Control Drawing).
Check the battery and test leads. If replacement is
necessary, use only the specified parts.
Contact a Fluke Service Center if the Calibrator needs
repair or does not seem to be operating properly.
If the Calibrator is under warranty, refer to the warranty
statement for warranty terms, conditions, and product-
return information.
If the warranty has lapsed, the Calibrator will be repaired
and returned for a fixed fee.

Cleaning

Periodically wipe the case with a damp cloth and
detergent; do not use abrasives or solvents.

Calibration

Calibrate the Calibrator once a year to ensure that it
performs according to its specifications.
mA Calibrator
Maintenance
11