Removing The Side Panel - Gateway 7210 System Manual

Removing the side panel

The side panel cannot be removed unless the front bezel has already been
removed. The side panel provides access to all of the internal components of
the server.
To remove the side panel:
1
Turn off the computer and disconnect all power cords.
2
Observe all safety and static electricity precautions, see "Preventing static
electricity discharge" on page 22.
3
Remove the front bezel as described in "Removing the front bezel" on
page 25.
4
Loosen the three thumbscrews from the left side of the front panel.
5
Slide the side panel to the front, disengaging the retaining tabs on the
top edge of the panel from the top of the chassis.
6
Lift the panel out and away from the chassis.
26
Case Access
Thumbscrew
Thumbscrew
Thumbscrew