MSI RG70A - Wireless-N 2T2R Broadband Router User Manual page 49

Enable wireless access control: Enable the wireless access control function
Adding an address into the list
Enter the "MAC Address" and "Comment" of the wireless station to be
added and then click <Add>. The wireless station will now be added into
the "Current Access Control List" below. If you are having any difficulties
filling in the fields, just click "Clear" and both "MAC Address" and
"Comment" fields will be cleared.
Remove an address from the list
If you want to remove a MAC address from the "Current Access Control
List ", select the MAC address that you want to remove in the list and then
click "Delete Selected". If you want to remove all the MAC addresses from
the list, just click the <Delete All> button. Click <Reset> will clear your
current selections.
Click <Apply> at the bottom of the screen to save the above configurations.
- Wi-Fi Protected Setup (WPS)
WPS is the simplest way to establish a connection between the wireless clients
and the wireless router. You don't have to select the encryption mode and fill in a
49