9 Bring up RG70A
Connect the supplied power-adapter to the power inlet port and connect it to a
wall outlet. Then, RG70A automatically enters the self-test phase. During self-test
phase, Power LED will blink briefly, and then will be lit continuously to indicate
that this product is in normal operation.
10 Smart Wizard
CHECK
•
Internet connection should be setup & ready to use (ADSL or cable modem).
•
Modem must provide RJ45 port to connect with RG70A.
•
Microsoft Windows compatible PC/Notebook with UPnP enabled network
adapter
•
CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Connect RG70A WAN port & your modem WAN port with RJ45 cable.
STEP 2
Power up RG70A.POWER led on front panel lights up & remains stable.
STEP 3
Connect RG70A LAN port & PC/Notebook RJ45 port with network cable.
STEP4
Insert the RG70A CD into your DVD/CD drive and SMART WIZARD should
run automatically with a few seconds. If not, please open Windows Explorer
and find the root directory of CD.
13