ActionTec GT704 User Manual page 99

Actiontec USB/Ethernet DSL Gateway User Manual
8. In the General tab, make sure the circle next to "Use the following
is selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
9. Enter the following address in the "
Enter the periods in the address by pressing the space bar on the keyboard.
10. Enter the following address in the "Subnet mask" text box:
Enter the periods in the address by pressing the space bar on the keyboard.
11. Click
. The Internet Protocol (
OK
12 In the Local Area Connection Properties window, click
Connection Properties window disappears.
13. Click Close in the Local Area Connection Status window. The window
disappears.
14. Close the Network and Dial-up Connections window by clicking on the "x"
button at the upper right corner of the window.
The computer restarts. It is now set up with a static
the Gateway's Web Configurator utility (as shown in chapters 3, 4, 5, and 6).
IP
192.168.0.2
255.255.255.0
TCP/IP
96
Address" text box:
) Properties window disappears.
Close.
address, allowing access to
IP
Address"
IP
The Local Area