Firewall; Access Control - Edimax 3G-6408n User Manual

3-7 Firewall

You can configure the firewall functions under "Firewall" to protect your network and
computer.

3-7-1 Access Control

You can also allow or deny computers with certain MAC addresses access to the
network.
MAC Filtering: Deny or allow access based on MAC address of client computer
Item Name
Enable MAC Filtering
Client PC MAC address
Computer Name
Description
Check this box to enable MAC address based filtering,
and please select 'Deny' or 'Allow' to decide the
behavior of MAC filtering table. If you select deny, all
MAC addresses listed in filtering table will be denied
from connecting Internet; if you select allow, only
MAC addresses listed in filtering table will be able to
connect to Internet.
Please input the MAC address of computer or
network device here, dash ( - ) or colon ( : ) are not
required. (i.e. If the MAC address label of your
wireless device indicates 'aa-bb-cc-dd-ee-ff' or
'aa:bb:cc:dd:ee:ff', just input 'aabbccddeeff'
All computer names found by this broadband router
on local network will be listed here. You can select the
computer name and click '<<' button to add selected
computer's IP address to 'Private IP' field.
Please note that this list may not be able to list all
computers on your local network. If you think some
computer doesn't appear in the list, select 'Refresh'
and this broadband router will rescan for all
computers attached to LAN port again.
95