Using "Pppoe" As Broadband Connection Type - Edimax 3G-6408n User Manual

2-4-4 Using "PPPoE" as broadband connection type

1. If your ISP is providing you Internet access via PPPoE (Point-to-Point Protocol over
Ethernet), select "PPPoE".
Item Name
User Name
Password
MAC Address
DNS Address
DNS Address 1
and 2
TTL
Service Name
MTU
Connection Type
Description
Input the user name assigned by your ISP here.
Input the password assigned by your ISP here.
If your ISP only permits computers with certain MAC
addresses to access the Internet, input your computer's MAC
address here. Press "Clone Mac address" to fill the MAC
address field with your computer's MAC address
automatically.
Select "Use the following IP address" if your ISP requires that
you do so.
Enter the primary and secondary DNS addresses assigned by
your ISP here.
Enable the "TTL" function if your ISP requires you to do so.
Give this Internet service a name (optional).
Input the MTU value of your network connection here. If you
do not know, use the default value.
Please specify a connection type here. There are 3 options:
1. "Continuous" keeps the Internet connection alive all the
time.
27