Edimax 3G-6408n User Manual page 34

Access
NOTE: These settings must be configured according to your Internet service. Please
contact your Internet service provider if you are not sure what to select.
3. Configure the "L2TP Settings" section.
Item Name
User ID
Password
L2TP Gateway
MTU
Connection Type
Idle Time Out
4. Click "OK" to complete setup.
you to do so.
Description
Input the user name assigned by your ISP here.
Input the password assigned by your ISP here.
Input the L2TP gateway assigned by your ISP here.
Input the MTU value of your network connection here. If you
do not know, use the default value.
Please specify a connection type here. There are 3 options:
1. "Continuous" keeps the Internet connection alive all the
time.
2. "Connect on Demand" only connects to the Internet when
you initiate Internet connection.
3. "Manual" connects to the Internet only when the
"Connect" button on this page is clicked, and disconnects
when the "Disconnect" button is clicked.
Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
"Connect on Demand" is selected.
33