Edimax 3G-6200nL V2 User Manual page 86

Private Port
Type
Public Port
Comment
Add
Reset
All existing virtual server mappings will be displayed in this page. To delete one or more
mappings, check the box of the mapping, then click 'Delete Selected' button to remove the
mapping. To delete all existing mappings, click 'Delete All' button. If you want to uncheck all
boxes, click 'Reset'.
When you finished with the settings in this page, you can click 'Apply' button to save
changes you made in this page, or you can click 'Cancel' to discard changes. After you click
'Apply' button, you'll see the following messages:
Please click 'Apply' to save changes you made and restart the broadband router, this
requires about 60 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.
Please note that this list may not be able to list
all computers on your local network.
Input the port number of the IP address which
provides Internet service.
Select the type of connection, TCP or UDP. If
you're not sure, please select 'Both'
Please select the port number of Internet IP
address which will be redirected to the port
number of local IP address defined above.
Please input any text to describe this mapping,
up to 16 alphanumerical characters.
Add the mapping to virtual server table.
Remove all inputted values.
85