Edimax 3G-6200nL V2 User Manual page 49

Idle Time Out
Enable Dual-WAN
Access
Click "Apply" to save the changes. After you have clicked "Apply", you will see the
following message:
Click "Apply" to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click "Continue" to configure other settings.
2. "Connect on Demand" only connects to the Internet when
you initiate Internet connection.
3. "Manual" connects to the Internet only when the
"Connect" button on this page is clicked, and disconnects
when the "Disconnect" button is clicked.
Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
"Connect on Demand" is selected.
Check the "Enable Dual-WAN Access" box if your ISP requires
you to do so.
48