Edimax 3G-6200nL V2 User Manual page 29

Idle Time Out
Enable Dual-WAN
Access
2. Click "OK" to complete setup.
3. When the following message appears, click "Apply" to save the changes and restart
the broadband router. The router will take about 60 seconds to restart.
2. "Connect on Demand" only connects to the Internet when
you initiate Internet connection.
3. "Manual" connects to the Internet only when the
"Connect" button on this page is clicked, and disconnects
when the "Disconnect" button is clicked.
Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
"Connect on Demand" is selecte
Check the "Enable Dual-WAN Access" box if your ISP requires
you to do so.
28