Windows 95 And Windows Nt - Gateway TM 5150 User Manual

Windows 95 and Windows NT

To modify your power management settings in Windows 95 and
Windows NT, you need to go into the BIOS program to change the power
management settings. See "Using the Power menu" on Page 61 for more
information on these settings and how to modify them.
Using Suspend mode in Windows 95 and Windows NT
Windows 95 and Windows NT use Suspend mode. When in Suspend
mode, your notebook enters a sleep state according to the power
management settings. Suspend mode causes the system to remove power
from most devices except memory.
The following table shows how to change the system modes in Windows 95
and Windows NT.
If your ...and you
notebook want to...
is...
Off Start up
On Suspend
In Suspend Resume
mode power
On Shut down
Do the following
Press the power button
Click ,
- OR -
F +F4
Press
N
Press the power button briefly
Click , ,
, then click
Chapter 4: Managing Power Use 55