Table of Contents
Advertisement
Using Standby mode in Windows 98
Windows 98 uses Standby mode (which is referred to as Suspend mode in
Windows 95). When in Standby mode, your notebook enters a sleep state,
cutting off power to most devices except memory.
The following table shows how to change the system modes in
Windows 98.
If your
...and you
notebook
want to...
is...
Off
Start up
On
Standby
In Standby
Resume
mode
power
On
Shut down
Windows 95 and Windows NT
To manage your power management settings in Windows 95 and
Windows NT, you need to go into the BIOS Setup program and change the
power management settings. See "Using the Power menu" on page 56 for
more information on these settings and how to modify them.
Using Suspend mode in Windows 95 and Windows NT
Windows 95 and Windows NT use Suspend mode (which is referred to as
Standby mode in Windows 98). When in Suspend mode, your notebook
enters a sleep state according to the power management settings. Suspend
mode cuts off power from most devices except memory.
...then do this
Press the power button.
Click Start, Shut Down, Standby, then
click OK.
- OR -
F
+F4.
Press
N
Press the power button briefly.
Click Start, Shut Down, click Shut Down
again, then click OK.
Chapter 3: Managing Power Consumption
55
Advertisement
Table of Contents
