Using Wi-Fi Direct - Zte Director User Manual

settings > Wi-Fi.
2. Touch or slide the Wi-Fi switch to the ON
position.
3. Touch WPS button connection.
4. Press the WPS button on the wireless router
and the access point will recognize your phone
and add it to the network.
NOTE: After you touch WPS button connection,
your phone gives you two minutes to press the WPS
button on the wireless router.

Using Wi-Fi Direct

Wi-Fi Direct allows Wi-Fi devices to connect to each
other without the need for wireless access points
(hotspots).
NOTE: Activating this feature will disconnect your
current Wi-Fi network connection.
1. Touch the Home Key > Menu Key > System
settings > More.
2. Check the Wi-Fi direct to turn on Wi-Fi direct.
3. Your phone will search for other devices enabled
with Wi-Fi direct connections. Touch Wi-Fi direct
settings to see all available devices.
4. Touch a device name to begin the connection
process.
NOTE: The target device must also have Wi-Fi
Direct service activated and running before it can
be detected by your phone.
5. Touch Connect.
The other device will receive a Wi-Fi Direct
41