Turning On The Hac Setting - Zte Director User Manual

Turning on the HAC Setting

To turn on the HAC function, touch the Home
Key > > Settings > Call settings and tick
the Hearing aids check box. For detailed
information, refer to "Using Your Phone With a
Hearing Aid Device" in the manual.
This section applies to T-Rating only and hearing
aids that contain telecoils. When the HAC setting
is on, your ZTE Director sends the audio from
™
your phone calls to the telecoil rather than to the
microphone of your hearing aid. You are likely to
hear calls much better because volume is
increased and background noise and feedback
are diminished. The HAC setting improves only
the calls you listen to through the earpiece. It does
not affect calls heard on the speaker or with a
headset. HAC requires extra battery power, so
watch your battery consumption when it's turned
on.
CAUTION: Do not turn on the HAC setting unless
you use a hearing aid with a telecoil. Using this
setting without a hearing aid or with a hearing aid
without a telecoil may be harmful to your hearing.
146