Zte Unite Mobile Hotspot User Manual page 13

You can click Refresh to update the information, or click Disconnect to terminate the wireless connection
between these Wi-Fi enabled devices and your ZTE Unite.
Select Wi -Fi Settings > Basic to set the configuration of the wireless network.

Sleep Time: Set the time before the ZTE Unite enters sleep mode, The ZTE Unite will enter sleep
mode if no Wi-Fi clients (devices) are connected to the ZTE Unite for a given period of time.

Network Mode: If all of the wireless devices connect with the ZTE Unite in the same transmission
mode, performance will be improved by choosing the appropriate wireless mode.

SSID: Service Set Identifier(SSID). Enter a string less than 30 characters as the name for your
wireless local area network(WLAN).

Broadcast SSID: Disable or Enable(Default) this function. If Enable is selected, the ZTE Unite
broadcasts the SSID, and other devices can search and connect to it. When you select Disable, other
devices can not search out the SSID. If you want someone to connect, you need to tell them the SSID,
and let them to setup manually.

AP Isolation: When Enable is selected, each of your wireless clients will not be able to communicate
with each other.

Country Code: Choose the right country code.

Frequency(Channel): Choose the appropriate channel to optimize the performance and coverage of
your wireless network.

MAX Connections: Choose the maximum number of the Wi-Fi enabled devices which are able to
connect to the ZTE Unite simultaneously.
Click Apply to save your settings.
12