Navigating the Device
Slide the Power Switch to the ON position to turn on the ZTE Unite. The screen lights up. After the
initialization of the ZTE Unite, the SSID and default password will display on the screen. Press the OK
button, the following icons will appear:
NOTE: Devices and software are constantly evolving — the screen images and icons displayed are for
reference only and may differ from your device.
WAN Info
Select
and press the OK button to check the WAN information. Use the UP and DOWN buttons to
scroll to the desired menu. Press the OK button to view information about the following WAN settings:
Network Provider: Displays the name of your service provider.
Network type: Displays your network type.
Roam: Displays whether or not your ZTE Unite is roaming.
WAN Connection: Check your connection status.
WLAN Info
Select
using the UP and DOWN buttons and press the OK button to check the following information.
Use the UP and DOWN buttons to scroll to the desired menu. Press the OK button to view information
settings:
SSID Information: Displays the SSID and password.
Connected Device: Displays the information about connected Wi-Fi devices.
Start WPS: Launch the Wi-Fi Protection Setup. Read the prompt on the display and refer to the
Usage Of Wi-Fi Protected Setup (WPS) chapter.
Settings
Select
using the UP and DOWN buttons and press the OK button to check the following information.
Use the UP and DOWN buttons to scroll to the desired menu. Press the OK button to view information
settings:
Device Info: Displays the basic information about your device: Phone Number, SIM ID, MEID, SW
Version, PRI Version and RSSI.
Data Connection: Connect or disconnect the WAN connection.
Data Roaming: Enable or disable the WAN connection when your ZTE Unite is roaming.
Network Select: Choose the desired network from the following options: 4G LTE/CDMA Mode and
CDMA Only Mode.
Receive Text Messages: Enable or disable your ZTE Unite to receive text messages in 4G LTE
network during power on.
Wi-Fi: Select Proceed to adjusting your Wi-Fi settings or Back to return to the previous menu.
18