Float Switch - Hoshizaki KMD-410MWH Service Manual
Modular crescent cuber
Hide thumbs
Also See for KMD-410MWH:
- Service manual (65 pages) ,
- Instruction manual (30 pages) ,
- Cleaning & sanitizing (2 pages)
Table of Contents
Advertisement
10) Install the new water tank in the reverse order of the removal procedure.
11) Refit the panels in their correct positions.
12) Turn on the power supply.
15. FLOAT SWITCH
1) Remove the pump motor bracket. See "V. 14. WATER TANK."
2) Pull up the pump motor bracket from the water tank.
3) Flip over the pump motor bracket assembly, then twist off the float switch and pull out
towards you.
47
Advertisement
Table of Contents
