Mackie DL806 Reference Manual page 89

You should now know how to set up your iPad in devices. Go ahead and experiment with it,
switching between the three selections. The more you do it, the more familiar it becomes.
Plus, it's software: you can't break it!
Also, notice in all of the examples that the text underneath the tools icon displays exactly what the
state of the iPad is in...and will be no matter what view you are in. Tools > Devices is just the place
to set up each iPad.
If you believe that the iPad should be connected when wireless, please follow the steps outlined
below in order:
(1) Connect the iPad wired just to ensure that the app works.
(2) Follow the directions again as listed in "Chapter 4: Mixer Hardware : Wireless Setup" (pages 24-27),
step-by-step. Did that work?
(3) You're here, so that didn't work. Now review the devices section which we just detailed (pages 84-89).
Are you good to go now?
(4) Well shoot, let's try something else out. Head over to the Troubleshooting section in Appendix A:
Service Information on page 122. That worked, right?
(5) Darn, we've run out of options. Time to contact our splendid Technical Support Heroes.
The contact information is built right into the Master Fader app! Just go to: Tools > Help > Support.
Page 94 explains this in greater detail.
Mackie DL806 and DL1608 Reference Guide
89