Mackie DL806 Reference Manual page 117

Master ID Button – The master fader's name and image is similar to that of a channel strip's
name and image. Like the channel faders, the master fader's name and image is also user-editable.
Simply tap the button at the bottom of the master fader and a popover allows editing a name
or selecting an image.
Let's start with the name. Tap in the name box to bring up the blinking cursor and keyboard (as seen
in the image below). Simply type in the name you want followed by a carriage return. Note the text
change between the button shown to the left ["Main"] versus the one as shown below ["PA"].
If the name is too long to fit, the button scrolls, displaying the entire name.
For familiarity, this is the same keyboard that is used for messaging or emailing from the iPhone
and iPod touch.
It goes without saying that tapping "Default Name" changes the master fader's name back to its
default name.
As seen in all of these images, a small name resides in the upper-left corner of the master ID button
regardless of the name and/or image. This system name represents each output and it cannot be
changed or removed. Trust us, it's for the best, as it is for easy identification of each output, even after
you rename it something goofy.
Mackie DL806 and DL1608 Reference Guide
117