Live Performance Setup - Behringer EURODESK SX4882 Brochure

EURODESK
SX4882
Octo-riffic Subgroups
Having eight Subgroups give you so much
flexibility you may just become a gymnast on
the side. These Subgroups can be used to send
eight individual tracks directly to your tape,
digital interface or hard disk recorder, or they
can be used as four stereo submixes. There are
two parallel outputs on each subgroup, to feed
up to 16 multi-track channels.
DCX2496
Low L Low R
EP2000
B2520 PRO
EP4000
Low L Low R
B1800X PRO
During a live show you could use
four of the subgroups for instrument
and vocal sub-mixing to the PA and
the other four could be for a tape sub-
mix, if you choose not to use Mix B as
your tape mix. For use with a stereo
PA you still have 4 subgroups total to
work with, and when used as a stage
monitor console, the SX4882 can provide
up to 16 independent monitor mixes by
combining the subgroups, Aux busses,
and L/R Mix B. Wicked!

Live Performance Setup

EUROLIVE F1220A
Floor Monitor
MAIN L OUT
MAIN R OUT
Tape/CD recorder
DSP2024P
Drums
Keyboard
Synth
Module
SUB 7-8 button SUB 5-6 button pressed, PAN
pressed, PAN channel channel center, GROUP 5 & 8
center, GROUP 7 & 8
MDX4600
In the studio, the eight Subgroups
allow maximization of recording inputs
by allowing several channels to be mixed
down to a smaller number of recording
tracks. By combining channel inputs
into subgroups which go directly out
to tape, you have the ability to record
even more than 24 discreet inputs.
Also, the outputs of the subgroups
have selectable operating output levels
(+4 dB or -10 dB) to match the inputs of
your recording device.
Continued on next page
Bass Guitar
Acoustic Guitar
BDI 21
Electric Guitar
ADI 21
V-AMP3
V-AMP3
XM8500 Mics
SUB 3-4 button pressed, SUB 3-4
PAN channel right, GROUP 4 button
pressed,
PAN channel
left, GROUP 3
Page 4 of 9
Electric Guitar
SUB 1-2 SUB 1-2
button button
pressed, pressed,
PAN PAN
channel channel
right, left,
GROUP 2 GROUP 1