Maintaining; Troubleshooting; Troubleshooting Symptoms; No Power - Gateway HD2401 User Manual

Use these conventions and the power can be reduced to the following levels:
To "wake" the monitor when it is in Standby/Active Off mode, move the mouse or press any
keyboard key. You can change the monitor's power management settings using the Windows
Control Panel. For more information, see your computer's User Guide.

Maintaining

To keep the monitor in optimal working order:
•
•
•
•
•

Troubleshooting

•
•

Troubleshooting symptoms

No power

•
www.gateway.com
VESA State LED Indicator
On Blue
Standby Orange
Off Purple
Do not block the ventilation holes.
Do not expose the monitor to rain or use near water.
Keep the monitor away from radiators or heat vents.
Keep the monitor out of direct sunlight.
Caution
Do not use any type of abrasive pad or glass cleaner. You will permanently
scratch the screen.
To clean the monitor, use a soft cloth slightly moistened with water only. Wipe the cabinet,
screen, and controls.
If you have problems with the monitor, the information in this chapter may help you solve
them without needing to call Customer Care.
Make sure that the monitor has warmed up for about 30 minutes before making any
judgments about the picture quality.
Make sure that the power cord is connected correctly to both the back of the monitor and
the wall outlet. For more information about connecting the power cord, see
monitor" on page 2.
Important
If the power LED is on, the monitor is receiving power.
Power Consumption
<150 W
<2 W
<1 W
"Connecting the
15