Using The Main Menu - Gateway HD2401 User Manual

•
•
•

Using the main menu

To use the main menu:
1
2
3
4
5
6
10
Using Your Gateway Flat-Panel Monitor
Touch (Cancel) to exit the shortcut menu.
Touch (Main Menu) to open the main menu.
To turn off the button icons and close the menu, wait about ten seconds without pressing
a button.
Touch (Menu) on the front of your monitor. The rest of the button icons light up and the
shortcut menu opens.
Important
The EzTouch menu buttons are very sensitive, and may be "pressed" by
holding your finger just above its surface. To completely "release" a touch button,
make sure that you lift your finger well away from the button.
Tip
To use a button, lightly touch its icon. For adjusting a setting's values, you can
press and hold touch buttons as you would conventional buttons.
Touch (Main Menu). The main menu opens.
Choose option or mode, Adjust setting
Select
Back
Menu or Menu Off
Tip
While the OSD is active, on-screen labels appear next to the buttons to help
you identify them.
Touch the (Choose Option) buttons to highlight a setting, then touch
the selected menu or setting.
Touch the (Adjust) buttons to adjust the setting or change the option.
Touch (Back) to return to a previous menu.
When you have finished making all adjustments, touch
(Select) to open
(Menu Off) to exit.