Using The Speaker Bar; Power Management; Energy Declaration; Maintaining - Gateway FHD2400 User Manual

24" widescreen lcd monitor
Table of Contents

Advertisement

Using the speaker bar

speaker bar will not initialize and will not work correctly. If this happens, turn the monitor
off, then back on to enable the speaker bar.
To turn on the speaker bar:
To use headphones:

Power management

Energy declaration

When connected to a computer that supports the VESA Display Power Management Signaling
(DPMS) Protocol, the monitor can conserve significant energy by reducing power consumption
during periods of non-use. When your computer goes into the energy saving mode, the monitor
will then enter the Active Off mode (sleep). In the Active Off mode the Power LED will still show
orange.
Use these conventions and the power can be reduced to the following levels:
VESA State
On
Standby
Off
To "wake" the monitor when it is in Standby/Active Off mode, move the mouse or press any
keyboard key. You can change the monitor's power management settings using the Windows
Control Panel. For more information, see your computer's User Guide.

Maintaining

To keep the monitor in optimal working order:
18
Using Your Gateway Flat-Panel Monitor
Important
If you connect the speaker bar to the monitor while the monitor is turned on, the
The speaker bar is always on. If you connected the speaker bar by following the instructions
in
"Setting up the optional speaker bar" on page
from the monitor's speaker bar power connector.
Plug headphones into either of the speaker bar's headphone jacks. The speaker bar's volume
is muted, and sound is played through the connected headphones. You can connect
headphones to both headphone jacks, and sound plays out of both sets of headphones.
LED Indicator
Blue
Orange
Purple
Do not block the ventilation holes.
Do not expose the monitor to rain or use near water.
Keep the monitor away from radiators or heat vents.
Keep the monitor out of direct sunlight.
Caution
Do not use any type of abrasive pad or glass cleaner. You will permanently
scratch the screen.
To clean the monitor, use a soft cloth slightly moistened with water only. Wipe the cabinet,
screen, and controls.
5, the speaker bar receives power constantly
Power Consumption
<150 W
<2 W
<1 W

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents