Connecting The Monitor; Attaching The Stand; Connecting Video Inputs - Gateway FHD2400H User Manual

Connecting the monitor

To set up the monitor, first attach the base, then make your cable connections.

Attaching the stand

To attach the stand:
1
2
3
4
5

Connecting video inputs

To connect video sources to your monitor:
1
2
2
Using Your Gateway Flat-Panel Monitor
Place the monitor face-down on a soft, non-marring surface. A non-slip mat on a tabletop
is ideal.
Remove the four thumbscrews that are attached to the back of the monitor.
Thumbscrew
Thumbscrew
Lay the stand on the monitor so the thumbscrew holes line up with the holes in the stand.
Replace the thumbscrews.
Test the bracket connection to make sure it is secure, then place the monitor upright.
Tip
Rotate the screen 90° to make it easier to connect the cables.
Position your computer and the monitor so you can reach the back of each.
Make sure that you computer is turned off.
Thumbscrew
Thumbscrew