Setting The Power On Picture Mode; Adjusting The Sound; Adjusting Sound Settings - Insignia NS-37D20SNA14 User Manual

Setting the power on picture mode

You can set the picture mode your TV uses when
you turn it on.
To set the power on picture mode:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight SETTINGS, then press
or ENTER. The SETTINGS menu opens.
3 Press or to highlight Reset to Default, then
press ENTER. The SETTINGS · RESET TO DEFAULT
menu opens.
4 Press or to highlight Power on in Vivid
Mode, then press ENTER.
5 Press or to highlight On (when you turn on
your TV, it will be in Vivid picture mode) or Off
(when you turn on your TV, it will be in the
picture mode it was in before you turned it off ),
then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
40
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV

Adjusting the sound

Adjusting sound settings

You can adjust sound settings to improve the sound
quality. You also can reset all sound settings to the
factory default.
To adjust sound settings:
1 Press MENU. The on-screen menu opens.
2 Press
ENTER. The AUDIO menu opens.
3 Press
ENTER to access the option. You can select:
• Sound Mode—Selects the sound mode. You
• Balance—Adjusts the balance between the
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• TV Speakers—Selects where to play TV audio.
• Digital Audio/SPDIF—Sends digital audio to
www.insigniaproducts.com
or to highlight AUDIO, then press
or to highlight an option, then press
can select:
• Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
• Theater—Enhances treble and bass for a
rich sound experience. This setting is good
for watching DVDs, Blu-ray discs, and
HDTV.
• Music—Preserves the original sound. This
setting is good for listening to music.
• News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
• Custom—Lets you manually adjust sound
settings.
left and right audio channels.
You can select On (default setting) to play
audio through the TV speakers or Off to play
audio through the speakers on an external
audio system.
an external audio system. You can select:
• PCM (to output audio in 2-channel stereo).
• RAW (to pass through the original digital
audio sound).
• Audio Delay—Fine tunes the audio when
it is not in sync with the video.
or