Setting The Power On Picture Mode; Adjusting Component Video Settings - Insignia NS-46E440NA14 User Manual

Setting the power on picture mode

You can set the picture mode your TV uses when
you turn it on.
To set the power on picture mode:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight SETTINGS, then press
or ENTER. The SETTINGS menu opens.
3 Press or to highlight Reset to Default, then
press ENTER. The SETTINGS · RESET TO DEFAULT
menu opens.
4 Press or to highlight Power on in Vivid
Mode, then press ENTER.
5 Press or to highlight On (when you turn on
your TV, it will be in Vivid picture mode) or Off
(when you turn on your TV, it will be in the
picture mode it was in before you turned it off ),
then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
43

Adjusting component video settings

You can adjust the horizontal distortion that may
occur when watching video from a component
video device.
To adjust component video settings:
1 Make sure you have a device connected to the
Y/P
your TV.
2 Press INPUT,
Component/AV, then press ENTER.
3 Press MENU. The on-screen menu opens.
4 Press
ENTER. The SETTINGS menu opens.
5 Press
then press ENTER. SETTINGS · COMPONENT
SETTINGS menu opens.
6 Press
then press ENTER.
7 Press
ENTER to access the option. You can select:
• Phase—Minimizes horizontal distortion.
• Reset Component Settings—Resets all
8 Press
9 Press MENU to return to the previous menu, or
press EXIT to close the menu.
www.insigniaproducts.com
NS-46E440NA14 Insignia 46" LED TV
/P (component video) jacks on the back of
B R
or to highlight
or to highlight SETTINGS, then press
or to highlight Component Settings,
or to highlight Component Settings,
or to highlight an option, then press
component video settings to factory mode.
or to adjust the option, or press
to select a setting.
or