Insignia NS-37D20SNA14 User Manual page 30

Using DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI 1 (DVI+ARC) jack to connect a computer using DVI.
If you use another HDMI jack, you will not hear sound from the TV speakers.
On your TV
HDMI cable Audio cable
connector with stereo
mini plug
HDMI 1 DVI
(DVI+ARC) AUDIO IN
jack jack
To connect a computer using DVI:
1 Make sure that your TV's power cord is unplugged and the computer is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the computer.
3 Connect the other end of the cable to the HDMI 1 (DVI+ARC) jack on the side of your TV.
4 Connect an audio cable with a stereo mini plug (not provided) to the DVI AUDIO IN jack on the side of your TV
and to the AUDIO OUT (headphone) jack on the computer.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
5 Plug your TV's power cord into a power outlet, then turn on your TV and the computer.
6 Press INPUT to open the INPUT SOURCE list.
7 Press or to select HDMI 1, then press ENTER.
8 Adjust the display properties on the computer, if necessary.
26
HDMI cable with
HDMI-DVI adapter
Audio cable with stereo
mini plug
www.insigniaproducts.com
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Side of TV