Related Manuals for Datavideo Teleprompter WR-100
Summary of Contents for Datavideo Teleprompter WR-100
- Page 1 Teleprompter Remote Controls WR-100 WR-400 Instruction Manual WWW.DATAVIDEO.COM Rev Date: 05-11-2013 P/N: TP Controllers...
-
Page 2: Table Of Contents
Further advice on the content of this manual or on the product can be obtained by contacting your local Datavideo Office or... -
Page 3: Warnings And Precautions
This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. -
Page 4: Warranty
Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, Hard Drives are only covered for the first 10,000 hours, or 1 year (whichever comes first). Any second year warranty claims must be made to your local Datavideo office or one of its authorized Distributors before the extended warranty expires. -
Page 5: Software Download From The App Store
Search bar at the top/bottom of the screen and type in Datavideo or dv Prompter. Then execute the search by tapping on the Search icon to the right. You will see this software as a result listed, simply tap on the icon and then Install. -
Page 6: Dv Prompter - User Interface - Ipad
DV Prompter - User Interface - iPad When the DV Prompter App opens the script on a black background is the document selected for use. To select a different script simply tap on it or choose the + button to add a new script document. App Settings Button This button opens the Settings Menu as shown on the following page. -
Page 7: Dv Prompter Application Set Up
Apple VGA/Composite adaptor cable. This cable can be purchased from the Apple store and is not supplied by Datavideo. The Border setting is used to bring the text displayed in from the edges of the display. This can be useful where the talent is not in line with the centre of the reading area or where the prompter is angled slightly up or down. -
Page 8: Remote Settings
Start Settings You can set the prompter to automatically start scrolling text or you can delay the beginning of the text scroll process by up to 10 seconds. If a delay is set then a countdown animation will be shown before the script starts moving. Remote Settings Here you can choose to use no remote [none], an optional wired remote or an optional Bluetooth remote. -
Page 9: How To Quickly Add Text Into A Dv Prompter Document
How to quickly add text to a DV Prompter document The prompting script, or presenters’ text, will probably exist as a text document from the planning stage of the production. By copying and pasting this script text from the original document into the text body of an email it can then be quickly sent to the email client on the smart phone or tablet. -
Page 10: Using The Optional Wired Remote Control
Using the optional Wired remote control Wired remote for Android™ or iOS™ devices with a headset jack input. The remote plugs into the headset jack on the smart phone. Ensure the remote jack has a good connection with the phone socket. How to set up the App for the wired remote control 1. -
Page 11: Using The Optional Bluetooth Remote Control
Using the optional Bluetooth remote control This remote is designed for use with Android™ and iOS / Apple™ devices. How to charge the Bluetooth remote control It is always best to charge the remote for at least one hour and thirty minutes before a prompting session. -
Page 12: How To Use The Bluetooth Remote Control
How to use the Bluetooth remote control 1. First pair the remote with the device – see How to pair the Bluetooth remote section. 2. Open the DV Prompter app on the cell phone or tablet device and go in to Settings. 3. - Page 13 Bluetooth and Wired modes The Bluetooth remote can be used as a wire free Bluetooth remote or it can also be used as a wired remote too. One of the two cables supplied with the Bluetooth remote has a 3.5mm stereo headset jack connector on one end.
-
Page 14: Frequently Asked Questions
Frequently Asked Questions Q: My Bluetooth remote does not seem to be charging and the LED does not light at all when connected to my computer. Is there something I am doing wrong? The LED light on the remote should flash red whilst charging with a computer. Ensure the computer is switched on during the charging process. -
Page 15: Specifications
How to reset the Bluetooth remote control Press and hold down the green button on the remote. Keep the green button depressed until the LED glows red (about 3 or 4 seconds). Now release the button. You are now ready to repeat the pairing process with the device. - Page 16 Related products The DV Prompter application and remote controls are designed to be used with the following teleprompter kits. TP-100 for TP-300 for Consumer camcorders & cellular telephones Professional camcorders & tablet computers TP-500 for TP-600 for DSLR Cameras & tablet computers ENG Cameras &...
-
Page 17: Service And Support
It is our goal to make your products ownership a satisfying experience. Our support staff are available to assist you in setting up and operating your system. Please refer to our web site www.datavideo.com for answers to common questions, support requests or contact your local office below.