Related Manuals for Datavideo WR-500
Summary of Contents for Datavideo WR-500
- Page 1 QUICK START GUIDE WR-500 remote control For use with Datavideo Teleprompter kits TP-600, TP-500, TP-300 and TP-100...
-
Page 2: First Use - Remote Starts In Wired Mode
First use – Remote starts in Wired Mode When first removed from the retail package the WR-500 remote is already in wired mode. When a button is pressed a RED LED will flash. The WR-500 can be switched to Bluetooth mode if required. -
Page 3: Bluetooth Mode - Pairing To Your Tablet Device
Bluetooth Mode – Pairing to your tablet device Switch the Bluetooth function ON within the tablet device settings. Open the DV Prompter app on the same tablet device and choose Bluetooth in the Remote Control menu. Select and start the required script within the DV Prompter app. To switch the remote into Bluetooth pairing mode press and hold the centre Play / Pause button for 3 to 4 seconds. -
Page 4: Service And Support
They can assist you in setting up and understanding this product. Please refer to our web site www.datavideo.com for answers to common questions, support requests or contact your local Datavideo office below. -
Page 5: Packing List
1 x Jack plug to jack plug cable for wired mode 1 x Lanyard necklace Overview This WR-500 remote control is designed to be used with Datavideo’s teleprompter products, DV Prompter and DVP-100. DV Prompter app is a FREE download from the Apple app store for iOS devices and also from Google Play for Android devices. -
Page 6: Connections And Controls
Connections and Controls Whilst Whilst Button scrolling text text paused Speed up text scroll Previous Break Marker Slow down text scroll Next Break Marker Pause text Play text Reduce font size Load previous script Increase font size Load next script Jack plug socket for wired mode operation... -
Page 7: How To Replace The Internal Cr2032 Battery
How to replace the internal CR2032 battery A CR2032 button battery is fitted inside this remote. The original battery supplied (when new) is expected to last for 3 years under average / normal use. This button battery can be replaced by the user when it dies. Please remove the case back carefully to avoid user damage to the PCB or case. -
Page 8: Reset - Return The Remote To Wired Mode
RESET – return the remote to wired mode To return the WR-500 remote to wired mode from Bluetooth mode simply press and hold the Play Pause button until the GREEN LED stops flashing and becomes a steady GREEN light. When the RED LED is shown on button presses the remote is in wired mode.