Related Manuals for Datavideo WR-500
Summary of Contents for Datavideo WR-500
- Page 1 BLUETOOTH TELEPROMPTER REMOTE CONTROL WR-500 Instruction manual w w w . d a t a v i d e o . c o m...
-
Page 2: Table Of Contents
Further advice on the content of this manual or on the product can be obtained by contacting your local Datavideo Office or dealer. -
Page 3: Fcc Compliance Statement
AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, or otherwise stressed. -
Page 4: Warranty
Warranty Standard Warranty • Datavideo equipment are guaranteed against any manufacturing defects for one year from the date of purchase. • The original purchase invoice or other documentary evidence should be supplied at the time of any request for repair under warranty. -
Page 5: Disposal
Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are covered for 1 year. • The three-year warranty must be registered on Datavideo's official website or with your local Datavideo office or one of its authorized distributors within 30 days of purchase. Disposal... -
Page 6: First Use - Remote Starts In Wired Mode
One end of the cable fits into the tablet’s headset socket. The other end plugs into the jack socket on the WR-500 remote. NOTE: When using this remote in wired mode the DV Prompter app should also be set to Wired – WR-500 in the Remote menu option. -
Page 7: Bluetooth Mode - Pairing To Your Tablet Device
Switch the Bluetooth function ON within the tablet device settings. Open the DV Prompter app on the same tablet device and choose Bluetooth – WR-500 in the Remote Control menu. Select and start the required script within the DV Prompter app. -
Page 8: Overview
Overview This WR-500 remote control is designed to be used with Datavideo’s teleprompter products, DV Prompter and DVP-100. DV Prompter app is a FREE download from the Apple app store for iOS devices and also from Google Play for Android devices. -
Page 9: Connections And Controls
Connections and Controls Whilst Whilst Button scrolling text text paused Speed up text scroll Next Break Marker Slow down text scroll Previous Break Marker Pause text Play text Reduce font size Load previous script Increase font size Load next script Jack plug socket for wired mode operation... -
Page 10: How To Replace The Internal Cr2032 Battery
How to replace the internal CR2032 battery A CR2032 button battery is fitted inside this remote. The original battery supplied (when new) is expected to last for 3 years under average / normal use. This button battery can be replaced by the user when it dies. Please remove the case back carefully to avoid user damage to the PCB or case. -
Page 11: Reset - Return The Remote To Wired Mode
RESET – return the remote to wired mode To return the WR-500 remote to wired mode from Bluetooth mode simply press and hold the Play Pause button until the GREEN LED stops flashing and becomes a steady GREEN light. When a LED is shown on button presses the remote is in wired mode. -
Page 12: Service & Support
Tel: +65-6749 6866 Fax:+65-6749 3266 Fax:+33-1-60376732 Tel: +86 531-8607 8813 E-mail:info@datavideovirtualset.com E-mail:service@datavideo.cn E-mail:info@datavideo.fr Please visit our website for latest manual update. www.datavideo.com/product/WR-500 All the trademarks are the properties of their respective owners. Datavideo Technologies Co., Ltd. All rights reserved 2018 Jul-11.2017...