Sleep Timer - Sharp Aquos LC-50LE650U Operation Manual

Direct Button Operation
OPTION SLEEP AUDIO FREEZE
m@@
@@@
Sma_
Centra]
You can change channels in several ways.
Method 1
Using CHA/V on the remote control unit or on the ]_/.
Method 2
Using remote control buttons 0-9, _ (DOT).
Examples:
To select a t or 2-digit channel number (e. g., Channel 5):
Press 5 ---> ENT.
To seJect a 3-digit channel number (e. g., ChanneJ 115):
Press t --_ 1 ---> 5 ---> ENT.
To select a 4-digit channel number (e. g., Channel 22.t):
Press 2 _ 2 _ • (DOT} _ t _ENT.
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
If you push %" by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter 0-9 and ,, (DOT), channel selection will be
made if there is no operation within a few seconds.
You can change the volume by pressing VOL+/- on
the ]V or on the remote control unit.
To increase the volume, press VOL +.
To decrease the volume, press VOL -.
Mutes the current sound output.
Press MUTE,
• ,,(_,, will be displayed on the screen, and the sound is
silenced.
Mute can be canceled by pressing VOL+/- or MUTE.
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP,
The remaining time displayswhen the sleep timer has been set.
Each time you press SLEEP, the remaining time switches
as shown below.
Off _ 30.-_ 60.-_ 90 _. 120
t i
When set, the time automatically starts counting down.
If you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.
• Select "Off" by pressing SLEEP to cancel the sleep timer.
The TVwill enterstandby when the remainingtime reachesO.
[] MTS/SAP stereo mode
The FV has a feature that allows reception of sound
other than the main audio for the program, This feature
is called Multi--channel Television Sound (MTS). The ]V
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP feature
allows a TV station to broadcast other information,
which could be audio in another language or something
completely different like weather information.
You can enjoy Hi-Fi stereo sound or SAP broadcasts
where avaiJable,
,, Stereo broadcasts: View programs like live sporting
events, shows and concerts in dynamic stereo sound.
• SAP broadcasts: Receive TV broadcasts in either MAiN
or SAP sound.
MAiN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear,
Obtain a clearer sound by manually switching to fixed
mono-sound mode.
You can change MTS as shown below to match the
television broadcast signal.
Press ENTER to toggle between audio modes.
Examples: when receiving MTS and SAP
STEREO mode: STEREO<,_ MONO
STEREO + SAP mode: ST(SAP) ,-_ SAP(ST),-_ MONO
t I
MAIN + SAP mode: MAIN,_ SAP
MONO mode: MONO
[] Digital broadcasting audio mode
The types of audio transmitted in a digital broadcast include
SURROUND as well as MONO and STEREO. In addition, it
is possible for multiple audio tracks to accompany a single
video track.
Press ENTER to toggle between audio modes.
Example: when receiving Digital broadcasting
STEREO (Audio1) .m STEREO (Audio2)
t..,,,,.. SURROUND (Audio3)"J-.I
- MTS only operates while in TV mode.
@- 19