Using Aquos Link - Sharp Aquos LC-50LE650U Operation Manual

Using AQUOS LiNK
This section explains how to play back a title in the
AQUOS LINK--compatible equipment.
1 Power on the AQUOS LINK-compatible equipment,
and select appropriate external input.
2 Press OPTION to display the Link Operation Menu
screen.
3 Press A/Y to select "Play from Rec. List", and
then press ENTER.
* The title list data from the connected AQUOS LINK--
compatible equipment displays.
4 Select the title with A/Y/4/_-, and then press I_
to start playback.
* This function works only when AQUOS LINK-compatible
equipment is connected.
You can call up a setup menu from the connected
AQUOS LINK-compatible equipment.
1 Press OPTION to display the Link Operation Menu
screen.
2 Press A/T to select "Show Start Menu", and then
press ENTER.
The setup menu of the AQUOS LiNK-compatible
equipment is displayed.
* Depending on the status of the equipment (recording or in
standby mode, etc), the setup menu will not be displayed.
* The setup menu will not be displayed wkh the player
BD-HP20U currently available.
You can switch the media (HDD or DVD) for playback
or recording on the AQUOS LiNK-compatible recorder.
1 Press OPTION to display the Link Operation Menu
screen.
2 Press A/Y to select "Change Media of Device",
and then press ENTER.
3 Select the desired media such as HDD or DVD.
* The Media type toggles each time you press ENTER in
"Change Media of Device".
° Select the media to be operated by the player.
2 Press A/Y to select "Link Booking (Rec. Book)",
and then press ENTER.
. The recorder's EPG is displayed.
3 Select the program to record.
* You can use A/T/41/I_, ENTER, RETURN, EXIT and
the colored buttons.
* This function works only when an AQUOS LiNK-compatible
recorder is connected.
* Refer to the operation manual of the recorder for details.
You can select to listen to the TV sound only from the
AQUOS LiNK-compatible audio system and manually
change its sound mode.
1 Press OPTION to display the Link Operation Menu
screen.
2
3
Press A/Y to select "Change Audio Output
Device", and then press ENTER,
Press A/Y 1o select "By AQUOS audio SP, and
then press ENTER.
* The sound from the TV speaker is muted and only the
sound from the AQUOS LINK-compatible audio system
is audible.
* You can useVOL+/- and MUTE.
Select "By AQUOS SP", and then press ENTER to
listen to the TM sound.
If multiple HDMt devices are connected in a daisy
chain, you can specify which device to control here.
1 Press OPTION to display the Link Operation Menu
screen.
2 Press j,/Y to select "HDMI Device Selection",
and then press ENTER. The HDMI device toggles
each time you press ENTER.
1 Press OPTION to display the Link Operation Menu
screen.
2 Press A/V to select "AQUOS LINK Setup", and
then press ENTER.
* The AQUOS LINK Setup menu screen is displayed.
You can call up the AQUOS LINK-compatible
recorder's EPG and preset timer recordings using the
rv's remote control.
1 Press OPTION to display the Link Operation Menu
screen.