Step 3, Install New Side Trim; Step 4, Install Side Panels - GE Monogram ZICP720 Installation Instructions Manual

Installation Instructions
J3] INSTALL NEW SIDE TRIM
CAUTION:
Handle parts with care to avoid
scratching.
• Remove the inside case trim on both refrigerators.
FoamSpacer
Pads
/
/
/
/
Remove the Phillips head screws from the inside
case trim of each product as shown. Remove and
discard side trim. Retain screws.
Applg the supplied foam spacer pads to the mating
side of one product as shown.
Install new side case trim with notches toward the
bottom. Install with original screws.
J_ INSTALL SIDE PANELS
Side panels must be used whenever the sides
of the refrigerator will be exposed. The i/4"
side panels will slip into the side case trim.
Secure the panels to the refrigerator with
stick-on hook and loop fastener strips. Order
the side panels from the cabinet manufacturer.
Cut a notch in the top front corner as shown
to allow clearance for corner kegs in the front
side trim.
Skip this step if gou are not using side panels.
* Dependingon
installationheight