Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control; Turning On Your Tv For The First Time - Insignia NS-19E310A13 User Manual

Using the remote control

Installing remote control batteries

The remote control model number is on the front of
the remote control.
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
To install remote control batteries:
Note
Your remote control may vary from the images
shown in these steps.
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
20

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote
Turning on your TV for the
first time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through
setting up basic settings including the menu
language, time setting, picture mode, TV signal
source, and the channel list.
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries. (See
• Connected an antenna, cable TV, or satellite
• Connected the power cord. (See page
2 Press
Your Menu Language screen opens.
3 Press
want, then press ENTER. The Choose Your Time
Setting screen opens.
4 Press
time manually) or Auto (to set the date and time
automatically from a TV signal source based on
the time zone you select).
www.insigniaproducts.com
NS-19E310A13 Insignia 19" LED TV
sensor on the front of your TV.
page 20 for details.)
TV. (See page 10 through
details.)
(power) to turn on your TV. The Choose
or to highlight the language you
or to highlight Mode, then press
or to select Manual (to set the date and
Note
If you select Auto, the displayed time will be
incorrect until your TV gets the correct time from a
TV signal source.
13 for details.)
10 for